sheet metal fabrication China , sheet metal box , sheet metal enclosure , sheet metal manufacturing , power supply enclosure

Postion:  Home >  Our Case >  Stamping & Bending > 

stamping sheet metal parts - Support OEM&ODM Service
Custom OEM&ODM Metal Producrts

stamping sheet metal parts - Support OEM&ODM Service



The system of turning sheets of steel right into a useful element or thing is called sheet metal stamping. The metallic is fed into a press, where the stamping tool, additionally called a die, creates the preferred form. The die is pressed into or thru the steel with remarkable pressure. The pressure used in the method is measured in lots.


except for a few specialized techniques, sheet steel stamping doesn’t use warmness. rather, it's miles completed with a cold-forming technique. despite the fact that no warmness is used, the part can pop out warm due to the friction that’s created among the steel and the die from the pressure of the clicking.


Common Sheet Metal Stamping Process


There are basically only three components to sheet metal stamping—the sheet metal, die, and press machine—but any single part can require multiple steps to arrive at its final form. The following guide explains a few common processes that might occur during metal stamping.

  1. Forming: Forming describes the technique of reworking the flat metal into another form by using making use of force. it's miles achieved in considered one of numerous methods, relying at the design specifications for the element. With a sequence of operations, the steel may be altered from a exceedingly easy form right into a complicated one.
  2. Blanking: Blanking is the most simple technique and initiates when the sheet or blank is fed into the press wherein the die cuts out the preferred shape. The ensuing piece is known as a clean. The blank may be the preferred element, also called a fully finished blank, or it is able to hold to the subsequent step of forming.
  3. Drawing: Drawing is a greater complex operation and is how vessels or deep depressions are fashioned. anxiety is used to carefully draw the material into a hollow space to exchange its form. though the material may stretch whilst it’s drawn, technicians try to keep away from stretching as a whole lot as feasible to keep the fabric intact. Sinks, cooking device, and oil pans for motors are generally made with drawing.
  4. Piercing: Piercing is nearly the other of blanking, but as opposed to saving the blanks, technicians use the cloth around the outdoor of the punched location. as an example, consider reducing biscuits from a rolled-out circle of dough. during blanking, the biscuits are stored; during piercing, on the other hand, the biscuits are discarded, and the hole-riddled remains are the desired final results.
Materials

Though virtually any metal, including gold, can be stamped, sheet metal is by far the most common. The type of metal used depends on the type of part that’s needed and its desired properties, such as corrosion- and heat-resistance.

Sheet metal stamping can produce parts from the following materials:

  1. Stainless steel
  2. Low- and high-carbon steel
  3. Aluminum
  4. Titanium
  5. Brass
  6. Bronze
  7. Copper
  8. Inconel
  9. Nickel alloys
Applications of Sheet Metal Stamping
In the stamping process, sheet metal is transformed into complex parts using highly specialized computer-aided drafting and manufacturing programs. Sheet metal stamping produces superior, resilient, heavy-duty parts quickly and efficiently. The results are so precise, they’re typically more reliable and consistent than manual machining.

The following industries use components that are created via sheet metal stamping:
  1. Automotive
  2. Renewable energy
  3. Medical
  4. Industrial
  5. Aerospace
  6. Hardware
  7. Home improvement
This list is by no means exhaustive. There is a considerable demand for sheet metal stamping, and the range of industries that depend on it is vast.

Precision Metal Stamping Services

When your industry requires high-caliber precision parts, you need a stamping company that meets the most stringent quality standards. Aranda Tooling, an ISO 9001:2015-registered company, has been manufacturing precision tools for companies worldwide since 1975. Today, we produce over 1 million highly detailed parts every week for even the most technologically advanced applications.

To find out more about our stamping services, please visit our services page, or request a quote online.


bg

Our email: info@hms1688.com

Contact us and just send us your drawing (SolidWorks,ProE,CAD,PDF,DXF...)

Links: Sheet Metal Fabrication Services | Precision & Rapid CNC Machining Services | Metal Welding Services | metal Cutting Services | Metal Bending Service | Metal Stamping Services | Surface Finishing | OEM/ODM Tube Bending Services | 

getaquote

sheet meatal quote